Home > resource > 

How to fix iPhone White Screen of Death

How to fix iPhone White Screen of Death

If you're a loyal apple fan, you must have tried to encounter the infamous death screen at some point. The most common impact of this troublesome fault appears, but it could also be a software error in your Apple device (such as: iPhone 7, 7S, SE, 6,6S, iPad, iPod, etc.).          

If your Apple device is stuck in the apple logo and white screen, which means that the IOS operating system is dead, is there any way to fix it? How can you fix the IOS Apple device when normal with the dead white screen? You don't have to worry about that, because many iOS users experience the "white screen" of death when you upgrading iOS". In this state, your iPhone iPad device is unable to respond to a given command. Therefore, before upgrading the iOS device to iOS 10/11, it is recommended that the iPhone data be backed up to the computer. In general, apple white screen death may be caused by a variety of reasons. Some of them are hardware, and some are software. In most cases, the white screen of death appears on the normal mobile phone because a drop falls on the hard surface. If the white screen of iPhone iPad is caused by software problems, you can try to fix it with third party tools, so as to save the repair cost. When you upgrade to iOS 10/11, this is the best way for iPhone iPad users to fix an apple white screen.          

There are many ways of dealing with death. One way is that you can go to an apple store to check and fix the equipment, but not everyone can afford more money. In the tutorial, or upgrade your device to iOS 10/11 back to factory reset, damage or damage, death you can find four effective methods to repair your iPhone iPad white screen. Most importantly, there is no doubt that you can save more money, according to this guide.     

*Note: iPhone 8 is not available yet, all need to wait for some time. The device currently supported by this program has:
iPhone:iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4
iPad:All models of iPad Pro, iPad Air, iPad mini, and iPad
iPod touch 5, iPod touch 4


Note: this software can fix iPhone / iPad in recovery mode, loop, or iTunes flag. IPhone / iPad cannot DFU mode. The iPhone / iPad screen becomes white apple logo / death. The iPhone / iPad screen becomes black, red or blue screen. IPhone / iPad restarts endlessly. IPhone / iPad appears frozen and does not respond. IPhone / iPad will not slide, unlock or slide off. Keep the cyclic flag at Apple iPhone / iPad. More of this.

Do not lose hope, however. Here I am going to show you 4 solutions tofix iPhone white screen of death:

Solution 1: Fix iPhone White Screen of Death without Losing Data

Solution 2: Fix White Apple Logo Screen of Death by Force Restart

Solution 3: Fix iPhone White Screen of Death by Restoring Your iPhone

Solution 4: Fix iPhone White Screen of Death by Entering DFU Mode

Tips: How to Avoid Getting iPhone into White Apple Logo Screen of Death

Solution 1: Fix iPhone White Screen of Death without Losing Data

If you are looking for a fuss-free way to your 'white screen' woes, dr.fone - iOS System Recovery can help! This software caters to all problems relating to iOS devices and capable of providing a quick-and-easy fix to the white screen problem.

More importantly, you don't have to worry about backing up your data before starting the repair process; dr.fone's software helps to protect your precious messages, contacts, music, videos and more!

How to fix white screen of death on iPhone with dr.fone

Step 1: Download and install dr.fone to your PC. Upon completing the installation, connect your iOS device to your computer and launch the dr.fone program.

Step 2: From the main window, select 'iOS System Recovery'. Click on 'Start' once your device has been detected.

Step 3: dr.fone will begin the repair process by downloading the latest iOS firmware. Simply hit 'Download' and wait for file to complete.

Alternatively, you can perform a manual download, before clicking 'Select' and importing the relevant firmware package that matches your iOS device.

Step 4: As soon as the firmware download is completed, dr.fone will enter the final recovery process for the 'white screen' glitch. And within 10 minutes, your device will be repaired and ready for use!

It's just that simple! By following the above instructions, your iOS device should be up and running in no time. And all your contacts, messages, photos and other precious data are still intact on your device. Also, dr.fone can help you recover data from broken iPhone which is beyond repair.

Solution 2: Fix White Apple Logo Screen of Death by Force Restart

Despite being a much derided piece of tech advice, 'turn it off and on again' is often a surprisingly effective solution for most minor glitches. iPhones are no exception as a hard reset can be used to recover a frozen device with ease.

Here are the steps needed to perform a force restart in the event that you encounter a white screen glitch.

For iPhone 7/7Plus:

  1. Press and hold the 'Sleep/Wake' and 'Home' buttons together untill you see the Apple logo appears.
  2. Let go of the 'Sleep/Wake' and 'Home'.
  3. Wait your iPhone turns to be normal.

For other iOS devices:

  1. First, press and hold down the 'Sleep/Wake' and 'Home' buttons simultaneously.
  2. Continue to hold on to both buttons until the Apple logo flashes onscreen. This process can take up to 10-20 seconds before completion.
  3. Release the buttons, wait for the iPhone to complete its boot up. And voila, we are done!

Solution 3: Fix iPhone White Screen of Death by Restoring Your iPhone

When encountering iPhone white screen, you can try to restore you iPhone with iTunes. Now let's check the following steps to restore iPhone and fix the white screen issue:

  1. Use a USB cable to connect your iPhone to the computer and run the iTunes.
  2. Click on 'Restore iPhone'.
  3. Then, iTunes wil popup a dialogue box, click 'Restore'.
  4. iTunes will to download the software for your iPhone and restore it when the downloads is completed.

Note: This method will clear all the contents and settings on your iPhone.

Solution 4: Fix iPhone White Screen of Death by Entering DFU Mode

Performing a hard reset might be a simple way of resolving common iPhone issues, but what if your mobile still refuses to work? Answer: Try booting your gadget in Device Firmware Upgrade (DFU) mode.

As its name implies, DFU mode is typically used to modify the firmware of a mobile phone. For instance, if you wish to install a custom firmware (or hush hush, perform a jailbreak), DFU mode will come in handy.

In this context, DFU mode can be used to restore an iPhone with a previous backup, or to restore factory settings. Be warned though, the latter will result in a complete reset of your phone's data (contacts, videos, images, etc.), so always remember to make a copy first!

With that said, here's how to enter DFU mode:

  1. Connect your iPhone to your computer. It doesn’t matter if your iPhone is on or off.
  2. Press and hold down the 'Sleep/Wake Button' and 'Home Button' together for 10 seconds.
  3. Release the 'Sleep/Wake Button' button, but keep pressing on the 'Home Button' for another 15 seconds.
  4. Then, iTunes will display a popup that says “iTunes has detected an iPhone in recovery mode.”
  5. Let go of the 'Home Button'. Your iPhone screen will be completely black. If you see the "Plug into iTunes" screen or Apple logo screen, it says you failed to enter DFU mode. In this case, you need to try the above steps again from the begining.
  6. Finally, restore your iPhone with iTunes.

Note: Normally, we can enter DFU mode to fix white screen of death. But this method will clear all your settings and data on your iPhone. And you are unable to backup your iPhone when it stuck in white screen. Therefore, dr.fone's solution in Part 1 might be a better choice since it can save your precious data.


Tips: How to Avoid Getting iPhone into White Apple Logo Screen of Death

As the famous proverb goes: "Prevention is better than cure".

Sometimes it's simply better to take care that a problem does not occur, rather than spending precious time and effort on solving it. dr.fone has these simple tips to share that will save you the pain of having to repair a damaged iPhone:

Tip 1: Reducing your phone's exposure to environmental stress is a surefire way of keeping it safe. Damp surroundings and dusty spaces are some physical risks that you should guard against as they can result in the 'white screen' problem, among other handphone woes.

Tip 2: Another common problem that smartphone users should watch for is overheating. Warm environments aside, this issue comes about when there is extra stress on the battery or other hardware resources of a smartphone. Be sure to give your phone a break every now and then by shutting it down!

Tip 3: Protective accessories, such as a simple cover, can help to prolong the longevity of your smartphone. Cases with extended edges can help to cushion the impact of a fall and reduce the chances of hardware damage occurring.

Tip 4: Software glitches are another common reason for the 'white screen' problem, and they appear more frequently in iPhones running earlier iOS builds (i.e. below iOS 7). Therefore, one effective preventative measure is to simply keep your iOS devices updated with the latest software.




comments powered by Disqus